Connex Wireless HDMI video kit

Plug & Fly Full HD Resolution Virtually no Latency Featuring less than 1 ms of latency, the CONNEX does not buffer or hold your video, so that you can see and control what’s happening live. Use CONNEX video to help you fly, aim the camera, or operate the gimbal 5.8G ISM Band Operation CONNEX uses the 5.1 to 5.8 GHz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz. Automatic Frequency Selection (AFS) will choose the best available channel to be used, and will move seamlessly to an alternative channel on-the-fly if needed Gimbal Control CONNEX is able to relay the control signal for an S.BUS-based gimbal mounted on the UAV. Using Futaba S.BUS from the remote control, you can use CONNEX to simultaneously get video from the drone and control the gimbal on it OSD (On-Screen Display) Overlay CONNEX On-Screen-Display (OSD) is a great way to see your flight status. The OSD shows both information about your wireless link status, and MAVLINK-based telemetry from your UAV flight controller Note: MAVLINK telemetry system required to supply OSD data (available separately) Encrypted Transmission CONNEX employs AES128 for the video encryption and RSA1024 for key exchange to help ensure no one unauthorized is able to intercept your video feed